Railway Accounts Department Examinations

Showing posts with label general expenditure. Show all posts
Showing posts with label general expenditure. Show all posts

Sunday, September 15, 2024

Works Tenders - Types of

 

Tenders in Works  – Types


  1. Open Tenders or Advertised tenders.

  2. Limited

  3. Special Limited tenders.

  4. Single Tender.


  1. Open/Advertised tenders:




ü  Open tendering system is the widely used one as it ensures fair competition by which reasonable rates can be obtained.  The system of invitation to tender by public advertisement in the most open and transparent  manner possible should be used as a general rule and must be adopted.  Powers to invite Open tenders Vide item No.6 of part-A of MSOP.


ü    Powers have been delegated to officers at different levels to call open tenders. 


ü  Generally before calling tenders, vetted sanctioned estimate for the work proposed to be tendered for, should be available and also other requirements such as funds availability, approved drawings, site availability, materials to be issued by Deptt etc., .   In the absence of sanction of detailed estimate, pre-vetting of tender schedule is to be taken.


  1. Limited tenders: 


ü  Where for reasons which should be in the public interest, it is considered not practical or advantageous to call for open tenders, Limited tenders may be invited with the concurrence of FA&CAO and approval of competent authority


ü   Limited tenders are to be invited from contractors borne on approved list. 


ü  In S.C.Rly, PHOD/CHOD is having powers to call Limited tenders up to Rs.5 crores in each case, HOD/DRM/ADRM/CSM is having powers up to Rs.1 crore. JAG officers have powers to call LT up to Rs.25 lakhs.  At least 10 names should be on the approved list of contractors.

  1. Special Limited tenders:


     

ü  This type of tendering system is adopted for works of specialized nature, works of urgent nature and consultancy works.  Finance concurrence is necessary. 


ü Special LT will be invited from the specialized and reputed contractors/organizations/agencies.


ü   Tenders from whom Special LT are to be invited should preferably be more than six but not less than four. 


ü  Tenderers need not be borne on the approved list.


  1. Single tender: 


ü  Single tender is invited in case of emergencies, accidents, breaches involving dislocation to traffic. 


ü  The powers to be exercised in times of cyclone, floods, accidents, sabotage, enemy action, explosions, cases of extreme urgency such as works or supplies necessary to safeguard life or property or repair damage to track caused by flood breaches,  washaways, accidents or other unforeseen contingency so as to maintain through communication.


ü   For restoration of traffic within shortest possible time, single tender is invited from the experienced and reputed contractor who has the previous experience of having executed such emergency works. 


ü   CAO/Con is having full powers to call single tender in case of works of specialized nature only.


ü   Finance concurrence is necessary. Estimate provision should be available to meet the expenditure incurred through quotation route. 


ü  To dispense with calling of tenders for works which are urgent in nature and to accept offers received in response to quotations. Finance concurrence is necessary. Powers have been delegated in Item No.5 – F of part – A of MSOP- works matters. 


ü  The powers shall be exercised by the officers with their administrative approval.  The powers should be exercised sparingly. The circumstances under which quotations have to be called should be spelt out. Quotations should not be for items which can be executed through the existing contracts including zonal contracts. Quotations should not be for fancy items. After finalization of the quotations, work order will be placed on the selected bidder. 

&&&&&&


Wednesday, September 4, 2024

Material Modification - New Definition सामग्री संशोधन - नई परिभाषा

 




Material Modification - New Definition 


  • Authority: ACS 59 dated 26.09.2022 (to the Engineering Code 2012) and Paras 1109 to 1112 of Engineering Code 2012 Click here 

  • MM stands for Material Modification 

  • MM sanctioned as an exception i.e., which should not be ordinarily resorted to. 

  • Work justifies to constitute as Material Modification is :  

  • Any work which is independent work per se (by its very nature),

  • But is essentially required to be done with the existing work 

  • Direct link with the existing work 

Sanction of the MM - Material Modification will be as per delegation of powers issued by the Railway Board from time to time. 

  • The following works will not constitute Material Modification:

  • Modifications that arise due to issue of policy by the Railway Board i.e., change in specifications or standards of construction, interlocking, electrification, traction, SOD requirement. 

  • Minor modifications during the execution of Yard work for completing the same. 

  • Modifications resulting out of statutory or legal requirements

  • Modifications to bring in economy in Construction and timely delivery of Project 

  • Any work essentially required for completing the Project.


Note: As a general rule, any additional scope of work should be sanctioned separately and should not be taken up as Material Modification of an existing work. 

******


सामग्री संशोधन - नई परिभाषा

प्राधिकरण: ACS 59 दिनांक 26.09.2022 (इंजीनियरिंग कोड 2012 के लिए) और इंजीनियरिंग कोड 2012 के पैरा 1109 से 1112 यहाँ क्लिक करें  

MM का मतलब है सामग्री संशोधन

MM को अपवाद के रूप में स्वीकृत किया जाता है, अर्थात, जिसका सामान्य रूप से सहारा नहीं लिया जाना चाहिए।


कार्य को सामग्री संशोधन के रूप में माना जाना उचित है:


  • कोई भी कार्य जो अपने आप में स्वतंत्र कार्य है (अपनी प्रकृति से),

  • लेकिन अनिवार्य रूप से मौजूदा कार्य के साथ किया जाना आवश्यक है

  • मौजूदा कार्य के साथ सीधा संबंध

  • MM - सामग्री संशोधन की स्वीकृति रेलवे बोर्ड द्वारा समय-समय पर जारी शक्तियों के प्रत्यायोजन के अनुसार होगी।


निम्नलिखित कार्य सामग्री संशोधन नहीं माने जाएँगे:


  • रेलवे बोर्ड द्वारा नीति जारी करने के कारण होने वाले संशोधन, अर्थात निर्माण, इंटरलॉकिंग, विद्युतीकरण, कर्षण, एसओडी आवश्यकता के विनिर्देशों या मानकों में परिवर्तन।

  • यार्ड कार्य के निष्पादन के दौरान इसे पूरा करने के लिए किए जाने वाले छोटे-मोटे संशोधन।

  • वैधानिक या कानूनी आवश्यकताओं के परिणामस्वरूप किए जाने वाले संशोधन

  • निर्माण में मितव्ययिता लाने और परियोजना की समय पर डिलीवरी के लिए किए जाने वाले संशोधन

  • परियोजना को पूरा करने के लिए अनिवार्य रूप से आवश्यक कोई भी कार्य।

नोट: एक सामान्य नियम के रूप में, कार्य के किसी भी अतिरिक्त दायरे को अलग से स्वीकृत किया जाना चाहिए और इसे किसी मौजूदा कार्य के भौतिक संशोधन के रूप में नहीं लिया जाना चाहिए।


******


Wednesday, May 29, 2024

Strategic Lines



 


Railway Accounts further classified into 1. Commercial Lines  2. Strategic Lines  

 

·         At present, Strategic lines exist in 4 Zonal Railways.   They are NR, NFR, NWR & WR

Major Heads between Commercial Lines & Strategic Lines



·        Definition of Strategic: Relating to the gaining of overall or long-term military advantage.

·        Strategic Lines:  Generally constructed for military-strategic purposes, opposed to the usual utility of Commercial lines for civilian purposes. 

·        To declare the Railway Line as a Strategic one, the approval of the Defence Ministry is required. 

·        Engineering Code Chapter 18 - Miscellaneous Works - Works required for Defence Purposes - deals with the Strategic Lines. 

·        Defence works: Divided between Railway Estimates & Defence Estimates.

·        Railway Estimates bears:

·        The entire expenditure of Defence Works carried out on the Strategic line will be borne by the Railways.

 

·        Defence Estimates bears: 

 

·        . The cost of construction of troop sidings, platforms etc., including the signaling arrangements required in the event of the siding or platform taking off from the main line beyond the limits of station yard.

 

·         The cost of land acquired for troop sidings, platforms, etc., if the railway Administration does not choose to acquire it for its own purpose;

 

·         The interest and maintenance charges on Railway's share of the cost in respect of Defence works executed by Railways on behalf of Defence services. 

                                                                                                *****

Friday, May 10, 2024

RSP - Road Safety Projects - PH 30 - ROB / RUB - New Vertical

 

RSP - Road Safety Projects - PH 30 - ROB / RUB - New Vertical


  • Authority: Railway Board Letter No. 2024/CE-IV/ROB-RUB/SCR, WR, ECR & NR dated 07.05.2024


  • Object of New Vertical: Execution of ROBs/ RUBs has not kept pace with the pace of new sanctions being given.  

 

  • New Vertical   - CAO/Con/RSP  - Exclusively for Road Safety Projects - for Road Crossing Works i.e., PH 29 - Level Crossings and PH 30 - ROB / RUB

 

  • RSP stands for Road Safety Projects (RSP also Rolling Stock Programme) 

 

Salient features of RSP:

 

  • RSP vertical - headed by CAO/Con/RSP  who is in HAG - Higher Administrative Grade

 

  • Assisted by SAG/Engineering Dept, other officers and staff

 

  • Reporting directly to GM  

 

  • Associated Finance: FA&CAO/Con 

  

  • GC - General Consultant:  engaged by CAO/Con/RSP for holistic planning of RSP works incl: Feasibility studies (new name for Surveys), DPR preparation, Sanction of Work, detailed structural design, detailed estimate & engagement of PSSA/PMS/PMC

 

  • EPC / Hybrid mode EPC / BOQ based Contracts - for execution of RSP

 

  • Nodal Directorate for RSP :  Bridge Directorate in Railway Board  

 

  • CAO/Con/RSP: Execution in-charge of RSP 


  •  CAO/Con/RSP & his Officers will exercise the powers of Construction organisation as per MSOP  (in respect of all Technical, Financial, Contractual & Personnel matters)

 

  • PCE: Monitoring and overall coordination for RSP 

Key points of RSP: 


  1. RSP - New Vertical for PH 30 - ROB / RUB 

  2. RSP headed by HAG Officer (of Engineering Dept)  

  3. Reporting directly to GM 

  4. Associated Finance: FA&CAO/Con

  5. Nodal Directorate: Bridge Directorate (in Railway Board) 

  6. PCE: Overall coordination of RSP


Abbreviations: 


  1. RSP - Road Safety Works  

  2. RSP - Rolling Stock Programme 

  3. ROB - Road Over Bridge 

  4. RUB - Road Under Bridge

  5. CAO - Chief Administrative Officer (HAG rank) 

  6. HAG - Higher Administrative Grade (PHOD rank) 

  7. PHOD - Principal Head Of Department (HAG rank) 

  8. PCE - Principal Chief Engineer (HAG rank/PHOD) 

  9. SAG - Senior Administrative Grade 

  10. GC - General Consultant 

  11.  DPR - Detailed Project Report 

  12. PSSA - Project Supervision Services Agency

  13. PMS - Project Management System 

  14. PMC - Project Management Consultancy

  15. EPC - Engineering Procurement & Construction

  16. BOQ - Bill Of Quantities

  17. MSOP - Model Schedule Of Powers 

&&&&